This laying method for creating stepping stones, walkways, barbecue areas and gazebos in the garden avoids extensive excavation and site preparation.
1
Step One
Lay the pavers on the ground to determine the number of steps needed for the garden path, making sure the pavers are placed at equal distance from each other.
2
Step Two
The joint width between the pavers should be chosen depending on the appearance required. For stepping stones or pathways, the pavers would normally be laid with open joints with grass in between. However, for areas where outdoor furniture will be used, pavers would normally be laid with closed joints.
3
Step Three
Mark the perimeter of each paver with a spade and then remove the pavers. Remove the turf up to a depth of 2”-3”.
4
Step 4
Fill with a layer of fine 3/16”-1/4” gravel and compact the gravel before laying the pavers. If preferred, lay a 1” thick layer of sand to add as a bed for the pavers.
5
Step Five
Carefully lay the pavers so they protrude above ground level by about ¼”. The pavers must not protrude above the lawn level, to avoid damaging lawnmower blades when cutting the grass.
6
Step Six
Carefully tap the pavers with a rubber mallet to ensure they are bedded properly.
Last Update
