Archatrak vertical closure clips work with both NM and Premier Pedestals
Two special stainless-steel clips are attached to the pedestal, one placed over the head and the other under the base, The pre-cut pedestal base allows the paver face to be positioned as close as possible to the pedestal column. The combination of these upper and lower clips grips the vertical face of the paver securely and prevents horizontal movement.
Caution: This solution is only intended to create a vertical closure where the step height is no higher than a normal stair riser. In all installations where the deck is not finished at a solid retaining wall, the completed elevated deck must be completely stable, free from all sideways movement and comply with all relevant regulations and codes.
Installation and Use Cases for Vertical Clips
A quick look at how vertical clips help stabilize perimeter pavers, create steps, and refine exposed deck edges.
Specs & Considerations
Installation Considerations
Top Length: 6 ½”
Top Width 1 ¾”
Bottom Length: 7”
Bottom Width: 1 ¾“
Considerations:
Check for any movement. If necessary, use adhesive to secure pavers to pedestal heads for the first two rows of pavers.
Clips are designed for holding 3/4″ thick porcelain pavers only.
The maximum height of the vertical face should normally not exceed 8″.
Only full width pavers, 24″ wide should be used.
