Porcelain Pavers and Roof Deck Systems – New York

Archatrak 2cm porcelain pavers, structural & interlocking Ipe wood deck tiles, pedestal systems, FRP grating, snow melt systems

Request samples Inquire now

Creating Outstanding Rooftop Environments

Transform underutilized rooftop space into a stunning looking, perfectly level, roof terrace, entertaining area, community space, pool deck or green roof. With one of the largest range of porcelain pavers in the USA, wood tiles and paver support systems, Archatrak can turn your New York roof deck project into reality.

We provide specialized solutions for virtually any elevated deck project, both commercial and residential, including:

concealed hold down systems to mitigate wind uplift
FRP grating and steel plates for maximum safety of elevated decks
permeable support structures for elevated, synthetic turf decks
electric snow melt systems for elevated paving
steel pedestals for totally non-combustible elevated decks
rail support systems for laying narrow plank style pavers
pedestals for supporting coventional wood plank deck with wood joists

Safe & Secure Commercial Roof Decks

Archatrak porcelain pavers offer exceptional durability, wear resistance and slip resistance for commercial use. However, because they are lighter and thinner than concrete pavers, we offer a range of solutions to ensure the utmost public safety with any pedestal supported roof deck.
In locations subject to high wind gusts, our wind uplift systems are designed to hold the pavers tightly in an interconnected array, minimizing the risk of wind uplift of individual pavers.
For rooftop bars, restaurants and pool deck areas, our protection systems for porcelain pavers minimize the risk where damage to pavers may occur due to impact by heavy objects.
In snowy winter conditions, our ‘Heatizon’ electric snow melt system efficiently prevents ice formation and snow accumulation on pedestal supported porcelain pavers.
In New York locations where fire regulations prevent construction of wood roof decks, Archatrak porcelain pavers used in conjunction with ‘Incendio’ steel pedestals provide a totally non-combustible roof deck solution.

Key Advantages of Archatrak Porcelain Pavers

Highly stain resistant including oil and grease stains

Hard wearing, durable & scratch resistant

Frost proof & freeze/thaw resistant

Mold & mildew resistant

Slip resistant

No fading in full sunlight

Exceptionally low maintenance

Completely fireproof

High load bearing capacity

Lighter than stone or concrete pavers

Why choose Archatrak as your New York supplier of roof deck materials?

Archatrak has been supplying deck tiles and pavers to NY tiling, roofing and landscape contractors as well as business owners and homeowners for more than 20 years. We can supply to any location in New York City where pallet load deliveries can be offloaded from a road carrier. Our primary warehouse in Jessup, MD maintains stock of pedestals, FRP grating, steel plates, Ipe wood tiles and imported Italian porcelain pavers ready to ship on request.

Where can I buy Archatrak products in New York?

First, we suggest you go to our Explore all colors and styles page where you can see all our currently available colors and styles of porcelain pavers. After you click on any colour, you can then order a small samples of the selected color. There’s no charge for the first four samples.

After you receive the samples, you can request a quote by email or phone or completing our online Quote request form.

What are the main advantages of using Archatrak porcelain pavers for outdoor spaces c.f. other paving materials?

Porcelain pavers offer numerous benefits for outdoor applications. They are highly durable, resistant to stains, scratches, and frost, making them suitable for various climates. Additionally, their low water absorption rate ensures minimal maintenance. Available in a wide range of designs and textures, Archatrak porcelain pavers can simulate the look of natural stone, wood, or concrete, but offer better long term performance and lower maintenance.

How do Archatrak porcelain pavers compare to traditional concrete pavers in terms of durability and maintenance?

Compared to traditional concrete pavers, porcelain pavers require less maintenance to keep them looking at their best. Porcelain’s non-porous nature makes it not only highly resistant to staining from oils or grease, but also resistant to penetration of water, preventing issues like cracking or efflorescence common in concrete pavers. Furthermore, porcelain pavers retain their color and finish over time without the need for sealing, offering long-term aesthetic appeal with minimal upkeep.

Can Archatrak porcelain pavers be installed over existing surfaces, and what are the recommended installation methods?

Yes, our porcelain pavers can be installed over existing surfaces, provided the substrate is stable and level. For on-grade applications, they can be dry-laid on grass, gravel, or sand, or for elevated decks and terraces they can be laid with adjustable height pedestals or stackable rubber pads for low height applications. They can also be bonded to a concrete slab with mortar where vehicles are present. Always follow Archatrak installation guidelines and consult with professionals to determine the best method for your specific project ensuring that you fully comply with all local building codes.

Product Range

Wood look
For those who admire the timeless beauty of wood but need the durability, fire resistance and stain resistance of porcelain, Archatrak wood-look porcelain perfectly replicates the veins, knots, pinholes, streaks, tonal variations and aesthetics of natural wood.

Stone look
If you’re inspired by the elegance of natural stone, Archatrak stone-look porcelain pavers deliver a striking resemblance to real stone, adding a touch of luxury with the durability of porcelain.

Cement look
A cement look without the heavy weight, the staining, and porosity of concrete pavers.

To see our full range of stocked porcelain paver colors, go to our Explore all colors and styles page where you can also order small samples.

Archatrak structural Ipe wood decking tiles can create highly stable, versatile, and long-lasting elevated deck systems for both commercial and residential applications.

The primary advantages of structural wood deck tiles over conventional joist supported wood plank decking include:

– Ease of installation
– Easier to transport and deliver on site
– Less weight loading on the rooftop
– No penetration of the substrate
– No visible fixings

Sizes:
24″ x 24″ (nom.)
24″ x 48″ (nom.)

24 x 24" tile top surface

24" x 24" tile underneath

48" x 24" tile

Archatrak ‘SwiftDeck’ Ipe wood interlocking deck tiles offer a convenient and stylish Do-it-Yourself way to upgrade patios, balconies, decks, and other outdoor areas without the cost of major renovations, specialized labor or disruption to your home.

You just snap them together over any hard surface to create an instant outdoor floor you can enjoy year after year.

Sizes:
12″ x 12″ (Colorado & Sierra)
12″ x 24″ (Double-C)

Archatrak ‘Prime’ adjustable height pedestals require just 3 models of pedestals to span a height range from 1 1/4″ to 16 1/2″ which normally requires up to 6 models of pedestals with other systems, saving considerable time and money for contractors and installers.

PR1 1 1/4″ – 2 1/2″
PR2 2 1/2″ – 6″
PR3 6″ – 16 1/2″

Archatrak stackable rubber support pads are used at lowest deck heights (less than 1/1/2″support height) after which our adjustable height ‘Prime’ pedestals can be used.

Our rubber pads are slip resistant, noise reducing and shock absorbing, unlike plastic pads.

PAD10 thickness: 1/4″
PAD6 thickness: 3/8″
LGH2 shim thickness: 1/16″

PAD10

PAD6

LGH2 shim

Archatrak 8′ x 4′ FRP grating panels are used both to provide break through protection of our 2cm porcelain pavers on elevated roof decks and also as base support surface for synthetic turf decks on rooftops.

Our MidiMesh FRP grating has 1 ½” x 1 ½” primary load bars with an extra intermediate cross bar at the top of the grating, ½” deep creating a ½” x ½” aperture.

Our MiniMesh FRP grating has 1 ½” x 1 ½” primary load bars with two extra intermediate crossbars at the top of the grating, ½” deep, creating apertures of just ¼” x ¼”. The small apertures prevent most objects from falling through but still offer excellent drainage.