Home > Porcelain Pavers > T50 Porcelain Pavers

T50 Porcelain Pavers

Heavy duty 5cm thick porcelain pavers for driveways and other vehicular applications

Archatrak T50 2-inch thick pavers offer a stylish alternative to concrete paving for driveways, parking areas, plazas and other broad landscape areas subject to vehicular traffic.

With the same outstanding stain resistance, wear resistance, fade resistance and frost resistance that defines the thinner 2cm and 3cm porcelain pavers, but with a breaking strength of over 4 times that of typical 2cm porcelain pavers, these extra heavy-duty pavers offer the opportunity to create more attractive outdoor paved areas than concrete pavers in demanding commercial environments, including paving for driveways and parking areas.

In rooftop applications, these heavy-duty pavers are the only porcelain pavers that meet the requirements of ANSI/SPRI RP-4 2013, Wind Design Standard For Ballasted Single-ply Roofing Systems. This code specifies that pavers installed in corner zones and perimeter zones over a fully adhered membrane must exceed 22 lb/sq.ft. (Section 4.1.3).

T50 pavers are currently available in six colors and six sizes. Our ‘Rustic’ range features a rustic look with hammered edges and inbuilt nibs on all four sides for quick and precise laying over sand or gravel. The ‘Universale’ range is designed for copings, cappings and curbs as the featured color is printed on the two long sides as well as the top surface.

Key Benefits of T50 Porcelain Pavers

Exceptionally high load bearing capacity

Excellent durability and wear resistance

Rich, fade resistant colors

Resistant to oil, grease and rust stains

Frost and freeze/thaw resistant

Resistant to moss and mildew

Precise size and thickness

Exceptionally low maintenance

T50 porcelain pavers are currently available in six colors:

Pietra Davos
Tirolo
Porfido Rosso
Lavica Sand
Lavica Grigia
Pietra Basalto

Rustic

Inbuilt nibs on all sides for precise spacing
Available in six colors and three sizes: 4″ x 4″, 4″ x 8″, 8″ x 8″

Universale

Printed on three sides: surface and the two longer sides
Ideal for pool coping, capping, construction of stairs, borders, sidewalks and curbs

Pavè

Standard format 2″ thick pavers with square edges
24″ x 24″, 16″ x 24″, 8″ x 16″

Six sizes are available in most colors:
24″ x 24″
16″ x 24″
8″ x 16″
8″ x 8″
4″ x 8″
4″ x 4″

8" x 16"

16" x 24"

24" x 24"

Breaking Strength (ISO10545-4): > 67 KN
Modulus of Rupture (ISO10545-4): ≥ 45 N/mm²Slip Resistance (ASTM C1028 C.O.F.): ≥ 60
Slip Resistance (DIN5130): R11
Water Absorption: ≤ 0.5
Weight: 23.4 lb/sq.ft.

Archatrak Inc. warrants that porcelain pavers sold by Archatrak are manufactured in accordance with ISO 13006 and will meet or exceed the performance specifications outlined in these standards.

If it is established that any paver has a manufacturing defect resulting from it not being manufactured in accordance with the said standards, we will replace the defective paver(s) free of charge with paver(s) of compatible color and shade as determined by us.

The complete warranty document can be downloaded here.