SBL Solar Powered Bollard Lights
Fully sealed, self-contained, marine grade aluminum solar bollard lights for use in the most extreme locations where continuous, full power lighting is required from dusk until dawn, 365 days a year.
No similar product can out-perform SBL Solar LED bollard lights for quality, durability, low maintenance and continuous performance. These exceptionally robust luminaries have demonstrated long-term resistance to the most extreme conditions in more than 35 countries, especially in locations where cyclones, hurricanes, typhoons, tidal surges, tsunamis and regular flooding are prevalent.
They will survive submersion by ocean waves, impact from golf ball-sized hail, constant exposure to the desert sun, covering by snow and attack by vandals and impact by flying or floating debris).
Each SBL bollard lighting fixture is custom configured with power levels selected to suit specific geographical locations and site conditions, guaranteeing constant light output from dusk to dawn.
Key Benefits of SBL Solar Bollard Lighting Fixtures
LED lights operate at full power from dusk until dawn. Every light is configured for the specific location. Lights are not dimmed at set times nor use proximity sensors.
Lights can operate for more than 5 days without sunlight, depending on LED power rating.
With no flat surfaces or edges for birds to grip on, SBL bollards eliminate the need for bird spikes. Debris or dust cannot easily settle which reduces the charging capacity of the PV panels.
Polycarbonate dome top can withstand serious vandalism, impact by flying objects or floating debris in waterways.
Capable of submersion up to 10' depth in locations where cyclones, hurricanes, typhoons, tidal surges, tsunamis, and regular flooding is likely.
Specific power models can be selected for locations fully shaded throughout the day with only ambient irradiation available for recharging.
Direct bury, plate mount, wall mounted, post mounted up to 138” high, with or without caps for shielding.
Specifications
Dome: LEXAN SLX Polycarbonate (Highest UV stabilized PC available). Won’t yellow or become brittle in less than 10 years.
Housing: LEXAN 203R Polycarbonate (UV stabilized)
Internal: STAREX ASA (Acrylonitrile styrene acrylate)
Poles: Aluminum 6106-T6 marine grade (25um anodized or powder coated)
Pole colors: Clear anodized (std), black anodized or powder coated available on special order.
Operating temp.: -22°F ~ +140°F ambient
Warranty: 10 years
Voltage: 3.2V
LED chips: 8 x 5mm Piranha LED super bright
Light distribution: Asymmetrical or symmetrical
Color: 4300K (Natural white) or 3000K (Warm white) or wildlife friendly option (red spectrum) 605nm-620nm.
Runtime: Dusk until dawn on full power
Solar module: 5w mono-crystalline
Module design life: 10 years
Battery type: 3.2V 17Ah cylindrical LiFePo4
Battery cycles: 3700 (expected minimum)
Battery design life: 10+ years
Plate mount: 7” diam. plate with three mounting holes.
Direct bury: Up to 17″ deep.
Wall Mount: 12” overall height, with or without caps.
Pole mounted: Aluminum poles 4 1/2″ dia. – 39″ to 138″.
Multiple arrays: Single light poles or arrays with 2, 3 or 4 lights
Pole finish: Standard – Clear anodized, ebony anodized or black powder coat. Custom – Any powder coated color from Dulux Duralloy or Alphatec range.
Reflector /caps: Available as option with all models & configurations.
Ordering Example:
SBL-160ANW – 840BPPC = 160mA asymmetrical natural white LED light on a 33” base plate mounted black satin powder coated pole.
Power Model:
040- 40mA
080- 80mA
120- 120mA
160- 160mA
200- 200mA
240- 240mA
280- 280mA
LED:
ANW– Asymmetrical light output 4300K
SNW– Symmetrical light output 4300K
AWW- Asymmetrical light output 3000K
SWW- Symmetrical light output 3000K
Pole Height:
130 WM 5.1″ (11.4” installed height)
142BP 5.6″ (11.9” installed height)
182BP 7.1” (13.5” installed height)
840 BP 33″ (39.4” installed height)
1140 DB 44.9″ (39.4” installed height)
1340 BP 53″ (59” installed height)
1790 DB 70.4″ (59” installed height)
1840 BP 79″ (79” installed height)
2440 DB 96.5″ (79” installed height)
WM – Wall Mount, DBA – Direct Bury. BPA – Base Plate
Pole Finish:
A – Anodised – Clear (Silver)
AB – Anodised – Ebony (Black)
PC – Black Satin (Default coat Color)